74.29. How to publish the users on the Abilis LDAP server

74.29. How to publish the users on the Abilis LDAP server
	Chapter 74. HowTo - Networking

74.29. How to publish the users on the Abilis LDAP server

Enter into the Abilis control-program or open the configuration file with the Console configurator and type the following commands.

a res:ldap or s act res:ldap	Add the LDAP resource. or If the resource already exists, set it active.
s p ldap srv-act:yes	Enable the LDAP runtime functionalities.
a user:test act:yes pwd:test ldap:yes	Create a new user test with an LDAP account.
a http rights id:2 user:test file:r dir:l	Allow the user test to access LDAP Web.
s user:frank addrbook-sync:yes addrbook-number:ctiiax	Publish the IAX user "frank".
s user:anne addrbook-sync:yes addrbook-number:ctisip	Publish the SIP user "anne".
s user:george addrbook-sync:yes addrbook-number:ctip ctip:101	Publish the user george owning the CTIP 101.
s user:jack addrbook-sync:yes addrbook-number:clus clus:myclus	Publish the user jack owning the CLUSTER "myclus".
s user:frank iax-addrbook-num:02'IAX-NUMBER'	Apply a macro on the published number of IAX user "frank".
s user:anne sip-addrbook-num:'SIP-NUMBER.s2'	Apply a macro on the published number of SIP user "anne".
s ctip:101 addrbook-num:02'NUM'	Apply a macro on the published number of CTIP 101.
s cticl clus:myclus addrbook-num:'NUM'123	Apply a macro on the published number of CLUSTER "myclus".
init ctisys	Initialize the CTI system.
save conf	Save the configuration.

On a working Abilis, a system restart is required to let the LDAP resource running if it wasn't running previously.

	Tip
	The published users populate the system address book, to hide other address books type a ldap rights id:1 user:test grants:-r and a ldap rights id:2 user:test grants:-r.

	Tip
	For the description of the LDAP web pages refer to Section 47.4.1, “Web Interface”.


74.28. How to activate the SNMP agent		Chapter 75. HowTo - CTI system