3.12. RVS connection

In this section it's shown how to connect an RVS to the Abilis CPX.

Follow the steps below to connect an RVS:

3.12.1. RVS I/O connection

In this section it's shown how to connect an RVS Digital Inputs/Outputs.

Figure 3.25. Pinout of RVS I/O board

Pinout of RVS I/O board

3.12.1.1. Connecting a motion sensor to Digital Input

The following figure explains how to connect a motion sensor (BMD503) to Digital Input of RVS.

Figure 3.26. Example of DIN connection

Example of DIN connection

3.12.1.2. Connecting an external relay to Digital Output

The following figure explains how to connect an external relay to Digital Output of RVS.

Figure 3.27. Example of DOUT connection

Example of DOUT connection