| 69.11. How to configure opc to collect call information from a remote abilis | ||
|---|---|---|
 | Chapter 69. HowTo - CTI system |  |
| 69.11. How to configure opc to collect call information from a remote abilis | ||
|---|---|---|
| | Chapter 69. HowTo - CTI system | |
Assumptions:
the OPC resource is already active on both local and remote abilis
the user of the remote abilis can access the remote OPC (in the example login:admin, password: admin)
Enter into the local Abilis control-program or open the configuration file with the Console configurator and type the following commands.
| s p opc maxremotes:5 | set the max number of remote abilis to monitor |
| s p opc rem:0 abilisid:test | configure the abilisid of the remote abilis |
| s p opc rem:0 server:192.168.1.150 | configure the ip address of the remote abilis |
| s p opc rem:0 login:admin password:admin | set login and password to access the remote abilis opc |
| s p opc rem:0 enabled:yes | enable the access the remote abilis opc |
| save conf | save the configuration |
On a working Abilis, you must initialize the OPC resource: init res:opc.
| |  | |
| 69.10. How to configure the speedlimit |  | 69.12. How to activate the Accounting service |