Chapter 69. HowTo - CTI system
Part VI. HowTo
HowTo - CTI system
Table of Contents
69.1. How to configure ISDN ports to connect PBX or ISDN lines
69.2. How to configure FXS (POTS) ports for analog telephones or fax machines
69.3. How to program a group of telephone lines
69.4. How to configure fax modem relay parameter
69.5. How to create a VoIP tunnel
69.6. How to register an IAX telephone onto Abilis
69.7. How to register a SIP telephone onto Abilis
69.7.1. How to register a SIP telephone onto Abilis when the telephone is behind a NAT
69.8. How to register Abilis as a client of Asterisk
69.9. How to register Abilis as a client of a SIP server
69.10. How to configure the speedlimit
69.11. How to configure opc to collect call information from a remote abilis
69.12. How to activate the Accounting service
69.13. How to enable pickup service for a POTS/ISDN port
69.14. How to enable pickup service for a SIP account
69.15. How to configure CTIDISA to implement a responder
69.15.1. Implementing a responder using MODE:INTRO
69.15.2. Implementing a responder using MODE:DISA
69.15.3. Getting a call on phones while the responder is active
69.15.4. Implementing a responder using MODE:ACD with 3 post selection
69.16. How to configure Last Calling Service
69.17. How to configure DATA CALL BACK using an CELL Key, calling an ISDN number
69.18. How to configure CTISMS to send sms using the web interface
69.19. How to configure CTISMS to send sms via emails
69.19.1. Instructions to send emails through sms
69.19.2. Instructions to send sms through emails using a client
