Part VI. HowTo

Table of Contents

• 67. HowTo - Management
  • 67.1. How to enter into the Abilis control-program
  • 67.2. How to prepare an Abilis Compact-Flash using a PC
  • 67.3. How to use the Console configurator
  • 67.4. How to remotely upgrade the Abilis firmware
  • 67.5. How to remotely transfer files using a terminal emulator
  • 67.6. How to restart the Abilis
  • 67.7. How to upgrade configuration files to newer firmware versions
  • 67.8. How to copy files using a removable drive
  • 67.9. How to know which kind of hardware is mounted on Abilis
  • 67.10. How to automatically reassign the USBPORTID
  • 67.11. How to upgrade ADSL2+ modem firmware
  • 67.12. How to manage licences
  • 67.13. How to view boot log
  • 67.14. How to change the login passwords
  • 67.15. How to activate the Abilis SSH server
  • 67.16. How to open a TELNET connection from Abilis
  • 67.17. How to open a SSH connection from Abilis
  • 67.18. How to create a list
  • 67.19. How to configure Abilis as a SYSLOG client
  • 67.20. How to trace the internal events for debugging purposes
  • 67.21. How to prevent brute force attacks
• 68. HowTo - Networking
  • 68.1. How to configure LAN settings
  • 68.2. How to activate a new ethernet port
  • 68.3. How to assign several IP addresses to the same LAN port
  • 68.4. How to configure ADSL connections using USB modems
  • 68.5. How to configure HDSL/SHDSL connections using V.35/G.703 synchronous ports
  • 68.6. How to configure CELLBOX or CELLKEY as gateway for Internet
  • 68.7. How to configure CELLBOX or CELLKEY as backup for Internet
  • 68.8. How to configure the default IP route
  • 68.9. How to configure the Network Address Translation (NAT)
  • 68.10. How to share a single Internet connection among multiple computers
  • 68.11. How to access IP hosts and services which are behind a NAT manager (port forwarding)
  • 68.12. How to setup DDNS service on Abilis
  • 68.13. How to configure a Remote Access Server (RAS)
  • 68.14. How to configure an ISDN PPP Dial-UP connection
  • 68.15. How to configure a VPN tunnel between two Abilis
  • 68.16. How to configure a voice tunnel between two Abilis
  • 68.17. How to activate the DHCP resource
  • 68.18. How to activate the FTP server
  • 68.19. How to activate the HTTP server
  • 68.20. How to activate the TRFA resource
  • 68.21. How to use state detection of IP interfaces
  • 68.22. How to activate the SNTP resource
  • 68.23. How to activate the SNMP agent
  • 68.24. How to publish the users on the Abilis LDAP server
• 69. HowTo - CTI system
  • 69.1. How to configure ISDN ports to connect PBX or ISDN lines
  • 69.2. How to configure FXS (POTS) ports for analog telephones or fax machines
  • 69.3. How to program a group of telephone lines
  • 69.4. How to configure fax modem relay parameter
  • 69.5. How to create a VoIP tunnel
  • 69.6. How to register an IAX telephone onto Abilis
  • 69.7. How to register a SIP telephone onto Abilis
  • 69.8. How to register Abilis as a client of Asterisk
  • 69.9. How to register Abilis as a client of a SIP server
  • 69.10. How to configure the speedlimit
  • 69.11. How to configure opc to collect call information from a remote abilis
  • 69.12. How to activate the Accounting service
  • 69.13. How to enable pickup service for a POTS/ISDN port
  • 69.14. How to enable pickup service for a SIP account
  • 69.15. How to configure CTIDISA to implement a responder
  • 69.16. How to configure Last Calling Service
  • 69.17. How to configure DATA CALL BACK using an CELL Key, calling an ISDN number
  • 69.18. How to configure CTISMS to send sms using the web interface
  • 69.19. How to configure CTISMS to send sms via emails
• 70. HowTo - Abilis VMX
  • 70.1. How to set up an Abilis VMX environment
  • 70.2. How to create a VM in VirtualBox
  • 70.3. How to install a Xen-compatible kernel on the guest
  • 70.4. How to convert and upload the disk image
  • 70.5. How to make a rtXen configuration file
  • 70.6. How to access to the VM's files
  • 70.7. How to start a virtual machine
  • 70.8. Configuration of a bridged network with domU and Abilis
  • 70.9. How to create a sparse file
  • 70.10. Example: Installation of SmeServer 8.1
• 71. HowTo - OPC panel - Enduser manual
  • 71.1. How to use the OPC panel
• 72. FAQ - Frequently Asked Questions
  • 72.1. ISDN lines
  • 72.2. POTS ports
  • 72.3. ADSL/HDSL lines
  • 72.4. CTI system
  • 72.5. IP router
  • 72.6. Abilis system
  • 72.7. Tunnelling
  • 72.8. IPSEC
  • 72.9. CTISMS
  • 72.10. UMTS Box