Chapter 72. FAQ - Frequently Asked Questions
Part VI. HowTo
FAQ - Frequently Asked Questions
Table of Contents
72.1. ISDN lines
72.1.1. How can I verify if an ISDN line is active?
72.1.2. Back up over ISDN doesn't work
72.1.3. How can I manage the backup over ISDN autoconnection?
72.1.4. Is it possible to connect ISDN phones to BRI/BRI-HFC cards?
72.1.5. Why (and how to) enable/disable analog ports on a NT1 Plus device?
72.2. POTS ports
72.2.1. The connection to a PBX using pots ports doesn't work
72.3. ADSL/HDSL lines
72.3.1. How can I verify if an ADSL line is active?
72.3.2. How can I verify if a HDSL line is active?
72.3.3. Why the xDSL line is slow?
72.3.4. Why can't I reach any website?
72.4. CTI system
72.4.1. How can I manage alternative CTI routings?
72.4.2. How does Round Robin scanning method work in CTI Port Group?
72.4.3. How can I change the POTS number length?
72.4.4. How can I activate the Caller Identification Presentation (CLIP) on POTS ports?
72.4.5. How can I manage the Calling Line Identification (CLI) for outcoming calls?
72.4.6. Why during a call do I hear a fax handshaking?
72.4.7. How can I view the maximum number of simultaneous calls supported by Abilis?
72.4.8. How can I view the available coders supported by the cards installed in Abilis?
72.4.9. How can I change the volume of a compressed call?
72.4.10. How many VoIP channels are used, depending on the call's source and destination?
72.4.11. What happens if a call fails with the “
CAUSE:FF B4 (CPX,Loop)
”?
72.4.12. How can i configure sip multialerting?
72.5. IP router
72.5.1. How can I query the IP routing table?
72.5.2. How does ACLBYPASS parameter work?
72.5.3. How can I view the Abilis ARP table?
72.5.4. How can I filter the NAT sessions?
72.6. Abilis system
72.6.1. How can I view the current RAM usage?
72.6.2. How can I view the current HD/CF space occupation?
72.6.3. How can I view the current CPU load?
72.6.4. How can I view if the BRI card has the H.100 bus?
72.6.5. How can I view if the Abilis USB ports are enabled?
72.6.6. Why do I get the error “
RESOURCE NOT PRESENT OR NOT RUNNING
” when I initialize a resource?
72.6.7. How can I change the Abilis prompt name?
72.7. Tunnelling
72.7.1. How can i have information about the use of ISDN backup?
72.8. IPSEC
72.8.1. Why the outgoing traffic from CPX toward an IPSEC vpn is blocked after updating from 6.5.x to 7.0.x?
72.9. CTISMS
72.9.1. Can SMS to Email be sent an SMTP server different from the Abilis one?
72.9.2. Can SMS also send CC: and BCC:?
72.9.3. Can SMS to Email or Email to SMS be more than 160 characters?
72.9.4. Are attachments supported for email to SMS?
72.9.5. Can SMS be send thru a dialing plan to take advantage of cheaper or marketing promo when sending SMS within the same Telco?
72.10. UMTS Box
72.10.1. How can I improve the quality of the calls with UMTS Box?
72.10.2. How does Abilis manage the PIN code of a SIM card?
