80.13. How to replace ADSL modem with ADSL2+ modem

To replace a ADSL modem with ADSL2+ modem is needed to change the USBPORTID parameter. This change is necessary because the modem ADSL2+ work with USB2.0.

s dev:dslusb-1 usbportid:noneCancel the usbportid (e.g. DSLUSB-1 device).
init usbdevInitialization of USB devices.
save confSave the configuration.

The command init usbdev must be typed after replacing of modem.


If you are connected remotely to ABILIS through this ADSL line, it is better to restart the ABILIS instead of initialize the device, please refer to: Section 80.10, “How to automatically reassign the USBPORTID”.


The Abilis ADSL2+ modem is supported starting from Abilis firmware version 7.5.