82.6. How to configure FAX modem relay parameter

Physical connections:

Refer to chapter Section 82.2, “How to configure FXS (POTS) ports for analog telephones or FAX machines” to know more about the configuration of POTS ports.


Enter into the Abilis control-program or open the configuration file with the Console configurator and type the following commands.

s p ctisys fm-relay:noSet the fax modem relay parameter to no for the ctisys resource.
a ctir pr:1 sr:clus1 out:pbx cdi:088888 cdo:35 fmrly:yesAdd a ctir rule to route a call incoming from 088888 toward the FAX. The parameter fmrly is enabled only for this routing.
save confSave the configuration.

On a working Abilis, you must initialize the CTISYS resource: init ctisys.


Refer to chapter Section 56.13, “FAX Relay with Abilis” to know more about the fm-relay parameter.