80.10. How to configure UMTS-BOX or LTE-BOX as gateway for the Internet
Prev Chapter 80. HowTo - Networking Next

80.10. How to configure UMTS-BOX or LTE-BOX as gateway for the Internet

Enter into the Abilis control-program or open the configuration file with the Console configurator and type the following commands.

a dev:cellkey-1

or

a dev:cellbox-1

Add the cellkey-1 device (for LTE-BOX or UMTS dongle).

or

Add the cellbox-1 device (for UMTS-BOX).

s p ctip:501 pdn-apn:mobile.itConfigure the APN (e.g. mobile.it).

Type the following commands to configure the IP resource:

a res:ip-11 subtype:pppAdd an IP over PPP resource.
s p ip-11 descr:UMTS-DATAConfigure the description of the IP resource.
s p ip-11 lowres:ctislinkSet to CtiSLink the lowres of the IP resource.
s p ip-11 nrty:30 rty:usConfigure the number of calls retry.
s p ip-11 nrty3:nomaxConfigure the PPP authentication number retry.
s p ip-11 cdo:99Configure the called output number.
s p ip-11 nat:outsideEnable NAT for the IP resource.
s p ip-11 ipadd:retrieve neigh:retrieveConfigure a dynamic IP address.
s p ip-11 username:provider_user password:provider_pwdConfigure the login information.
s p ip-11 local:chap,pap remote:noneConfigure the local and remote authentication protocol.
save confSave the configuration.
warm startRestart Abilis.

Configure the default IP route

a ipr net:0.0.0.0/0 ip:11Add a default route by configuring in the IP parameter the IP resource associated to the WAN connection.
save confSave the configuration.
[Note]Note

In the Console configurator, you must type the command: a sipr id:0 net:0.0.0.0/0 ip:11

Type the following commands to configure the data routing:

a ctir pr:1 descr:umts-data bci:data cdi:99 poi:Sl out:501Add a rule to route data to CTIP 501.
init ctirInitialize the CTIR resource.
save confSave the configuration.
Prev Up Next
80.9. How to configure VDSL connections using USB modems Home 80.11. How to configure UMTS-BOX or LTE-BOX as backup for the Internet