| 80.27. How to activate the SNTP resource | ||
|---|---|---|
 | Chapter 80. HowTo - Networking |  |
| 80.27. How to activate the SNTP resource | ||
|---|---|---|
| | Chapter 80. HowTo - Networking | |
The SNTP resource can work as client or server.
Enter into the Abilis control-program or open the configuration file with the Console configurator and type the following commands.
| a
res:sntp or s act res:sntp | Add the SNTP resource. or If the resource already exists, set it active. |
| s p sntp cliact:yes | Enable the SNTP client runtime functionalities. |
| s p sntp host-1:129.132.2.21 srcadd:out-ip | Configure the SNTP host address and the Source IP address for client requests. |
| save conf | Save the configuration. |
On a working Abilis, a system restart is required to make the SNTP resource running.
Enter into the Abilis control-program or open the configuration file with the Console configurator and type the following commands.
| Activate the SNTP client. | |
| s p sntp servact:yes | Enable the SNTP server runtime functionalities. |
| save conf | Save the configuration. |
On a working Abilis, a system restart is required to make the SNTP resource running.
| |  | |
| 80.26. How to use state detection of IP interfaces |  | 80.28. How to activate the SNMP agent |