Part VI. HowTo

Table of Contents

• 83. HowTo - Management
  • 83.1. How to enter into the Abilis control-program
  • 83.2. How to prepare an Abilis Compact-Flash using a PC
  • 83.3. How to install or fix Abilis with the MiniPC recovery tool
  • 83.4. How to use the Console configurator
  • 83.5. How to remotely upgrade the Abilis firmware
  • 83.6. How to remotely transfer files using a terminal emulator
  • 83.7. How to restart the Abilis through the command-line and the WEB interface
  • 83.8. How to upgrade configuration files to newer firmware versions
  • 83.9. How to copy files using a removable drive
  • 83.10. How to know which kind of hardware is mounted on Abilis
  • 83.11. How to automatically reassign the USBPORTID
  • 83.12. How to restart a USB device
  • 83.13. How to replace USB Ethernet with USB GigaEthernet
  • 83.14. How to replace ADSL modem with ADSL2+ modem
  • 83.15. How to upgrade ADSL2+ modem firmware
  • 83.16. How to upgrade VDSL2 modem firmware
  • 83.17. How to upgrade UMTSBOX-2 firmware
  • 83.18. How to upgrade POTS card firmware
  • 83.19. How to upgrade POTSBOX firmware
  • 83.20. How to upgrade POTSHUB card firmware
  • 83.21. How to upgrade RJS firmware
  • 83.22. How to manage licences
  • 83.23. How to view boot log
  • 83.24. How to change the login passwords
  • 83.25. How to activate the Abilis SSH server
  • 83.26. How to open a TELNET connection from Abilis
  • 83.27. How to open a SSH connection from Abilis
  • 83.28. How to activate the HTTP server
  • 83.29. How to activate the FTP server
  • 83.30. How to create a list
  • 83.31. How to configure Abilis as a SYSLOG client
  • 83.32. How to trace the internal events for debugging purposes
  • 83.33. How to prevent brute force attacks
  • 83.34. How to trace IP packets flow with IPFLOW Tracer
• 84. HowTo - Networking
  • 84.1. How to configure LAN settings
  • 84.2. How to activate a new Ethernet port
  • 84.3. How to activate a new USB Ethernet port
  • 84.4. How to assign several IP addresses to the same LAN port
  • 84.5. How to assign a VLAN for Ethernet interface
  • 84.6. How to change the MAC address of the Ethernet or EthernetUSB interface
  • 84.7. How to configure ADSL connections using USB modems
  • 84.8. How to configure ADSL/VDSL connections using Ethernet modems
  • 84.9. How to configure VDSL connections using USB modems
  • 84.10. How to configure UMTS-BOX or LTE-BOX as gateway for the Internet
  • 84.11. How to configure UMTS-BOX or LTE-BOX as backup for the Internet
  • 84.12. How to configure the default IP route
  • 84.13. How to configure the Network Address Translation (NAT)
  • 84.14. How to share a single Internet connection among multiple computers
  • 84.15. How to access IP hosts and services which are behind a NAT manager (port forwarding)
  • 84.16. How to configure the NAT loopback
  • 84.17. How to redirect DNS requests to Abilis
  • 84.18. How to setup DDNS service on Abilis
  • 84.19. How to configure a Remote Access Server (RAS)
  • 84.20. How to configure an ISDN PPP Dial-UP connection
  • 84.21. How to configure a VPN tunnel between two Abilis
  • 84.22. How to configure a voice tunnel between two Abilis
  • 84.23. How to activate the DHCP resource
  • 84.24. How to activate the IP TRFA resource
  • 84.25. How to use state detection of IP interfaces
  • 84.26. How to activate the SNTP resource
  • 84.27. How to activate the SNMP agent
  • 84.28. How to publish the users on the Abilis LDAP server
• 85. HowTo - CTI system
  • 85.1. How to configure ISDN ports to connect PBX or ISDN lines
  • 85.2. How to configure FXS (POTS) ports for analog telephones or FAX machines
  • 85.3. How to configure PCphone
  • 85.4. How to program a group of telephone lines
  • 85.5. How to configure a multicast group of SIP phones
  • 85.6. How to configure FAX modem relay parameter
  • 85.7. How to create a VoIP tunnel
  • 85.8. How to register an IAX telephone onto Abilis
  • 85.9. How to register a SIP telephone onto Abilis
  • 85.10. How to register Abilis as a client of Asterisk
  • 85.11. How to register Abilis as a client of a SIP server
  • 85.12. How to configure the Speed Limit
  • 85.13. How to configure OPC to collect call information from a remote Abilis
  • 85.14. How to activate the Accounting service
  • 85.15. How to enable pickup service for a POTS/ISDN port
  • 85.16. How to enable pickup service for a SIP account
  • 85.17. How to configure CTIDISA to implement a responder
  • 85.18. How to configure Last Calling Service
  • 85.19. How to configure DATA CALL BACK using a UMTS-BOX or LTE-BOX, calling an ISDN number
  • 85.20. How to configure CTISMS to send SMS using the Web interface
  • 85.21. How to configure CTISMS to send SMS via emails
  • 85.22. How to configure a Conference
  • 85.23. How to activate On-Demand recording
  • 85.24. Sending Alarm through a call
  • 85.25. Sending Alarm through SMS
• 86. HowTo - Abilis VMX
  • 86.1. How to set up an Abilis VMX environment
  • 86.2. How to create a VM in VirtualBox
  • 86.3. How to install a Xen-compatible kernel on the guest
  • 86.4. How to convert and upload the disk image
  • 86.5. How to make a rtXen configuration file
  • 86.6. How to access to the VM's files
  • 86.7. How to start a virtual machine
  • 86.8. Configuration of a bridged network with domU and Abilis
  • 86.9. How to create a sparse file
  • 86.10. Example: Installation of SmeServer 8.1
• 87. HowTo - OPC panel - Enduser manual
  • 87.1. How to use the OPC panel
• 88. FAQ - Frequently Asked Questions
  • 88.1. ISDN lines
  • 88.2. POTS ports
  • 88.3. ADSL lines
  • 88.4. CTI system
  • 88.5. IP router
  • 88.6. Abilis system
  • 88.7. Tunnelling
  • 88.8. CTISMS
  • 88.9. UMTS Box