Chapter 73. HowTo - CTI system
Part VI. HowTo
HowTo - CTI system
Table of Contents
73.1. How to configure ISDN ports to connect PBX or ISDN lines
73.2. How to configure FXS (POTS) ports for analog telephones or FAX machines
73.3. How to configure PCphone
73.4. How to program a group of telephone lines
73.5. How to configure a multicast group of SIP phones
73.6. How to configure FAX modem relay parameter
73.7. How to create a VoIP tunnel
73.8. How to register an IAX telephone onto Abilis
73.9. How to register a SIP telephone onto Abilis
73.9.1. How to register a SIP phone supporting BLF onto Abilis
73.9.2. How to register a SIP telephone onto Abilis when the telephone is behind a NAT
73.10. How to register Abilis as a client of Asterisk
73.11. How to register Abilis as a client of a SIP server
73.12. How to configure the Speed Limit
73.12.1. How to configure Dynamic Speed Limit
73.13. How to configure OPC to collect call information from a remote Abilis
73.14. How to activate the Accounting service
73.15. How to enable pickup service for a POTS/ISDN port
73.16. How to enable pickup service for a SIP account
73.17. How to configure CTIDISA to implement a responder
73.17.1. Implementing a responder using MODE:ACD with 3 post selection
73.17.2. Implementing a responder using MODE:DISA
73.17.3. Implementing a responder using MODE:INTRO
73.17.4. Getting a call on phones while the responder is active
73.17.5. How to configure a DISA Queue
73.18. How to configure Last Calling Service
73.19. How to configure DATA CALL BACK using an CELL Key, calling an ISDN number
73.20. How to configure CTISMS to send SMS using the Web interface
73.21. How to configure CTISMS to send SMS via emails
73.21.1. Instructions to send emails through SMS
73.21.2. Instructions to send SMS through emails using a client
73.22. How to configure a Conference
73.23. How to activate On-Demand recording
73.24. Sending Alarm through a call
73.25. Sending Alarm through SMS
