68.17. How to activate the HTTP server

68.17. How to activate the HTTP server
	Chapter 68. HowTo - Networking

Enter into the Abilis control-program or open the configuration file with the Console configurator and type the following commands.

a res:http or s act res:http	Add the HTTP resource. or If the resource already exists, set it active.
s p http act:yes	Enable the HTTP runtime functionalities.
	Repeat the following commands for each user that you want to enable to HTTP.
a user:httpuser pwd:httpuser http:yes	Add the user `httpuser` and enable it to HTTP.
a http rights path:/sys/trfa/ user:httpuser	Enable the `httpuser` to access the “IP traffic analyzer” link.
a http rights path:/sys/opc/ user:httpuser	Enable the `httpuser` to access the “Operator Panel Control” link.
a http rights path:/sys/sms/ user:httpuser	Enable the `httpuser` to access the “SMS Gateway” link.
a http rights path:/sys/cp/ user:httpuser	Enable the `httpuser` to access the “Control Port” link.
a http rights path:/sys/admin/ user:httpuser recur:no	Enable the `httpuser` to access the “Configuration information” link.
a http rights path:/sys/admin/groups/ user:httpuser	Enable the `httpuser` to access the “Groups administration” link.
a http rights path:/sys/advuser/ user:httpuser	Enable the `httpuser` to access the “Advanced User activities” link.
a http rights path:/sys/admin/users/ user:httpuser	Enable the `httpuser` to access the “Users administration” link.
a http rights path:/sys/admin/lists/ user:httpuser	Enable the `httpuser` to access the “Lists administration” link.
a http rights path:/sys/admin/disa/ user:httpuser	Enable the `httpuser` to access the “DISA administration” link.
save conf	Save the configuration.

On a working Abilis, a system restart is required to make the HTTP resource running.

68.17.1. How to activate the HTTP over SSL server

Enter into the Abilis control-program or open the configuration file with the Console configurator and type the following commands.

	Activate the HTTP server.
a res:ssl or s act res:ssl	Add the SSL resource. or If the resource already exists, set it active.
s p ssl act:yes	Enable the SSL runtime functionalities.
s p http act-s:yes	Enable the HTTPS runtime functionalities.
s p http sesnum-s:12	Configure the number of HTTPS sessions
save conf	Save the configuration.

On a working Abilis, a system restart is required to make the SSL resource running.

Note

	Note
Verify that the SSL protocol is enabled in the Users and HTTP Virtual Paths Access Rights tables. [17:53:34] ABILIS_CPX:`d user:httpuser` Parameter: \| Value: ---------------+--------------------------------------------------------------- USER: httpuser ALIAS: httpuser ID: 4 <Read Only> PWD: ******* ACT: YES GROUP: CTIP: # CLUS: # OPC-ROLE: USER OPC-VIEW: * OPC-MONITOR: NONE HTTP: YES HTTP-PROT: PLAIN,SSL ------------------------------------------------------------------------------- [15:12:54] ABILIS_CPX:`d http rights` ------------------------------------------------------------------------------- ID: PATH: USER: FILE: DIR: RECUR: PROT: ------------------------------------------------------------------------------ 3 /sys/opc/ httpuser r--- l--- YES PLAIN,SSL ------------------------------------------------------------------------------- ...

Verify that the SSL protocol is enabled in the Users and HTTP Virtual Paths Access Rights tables.

[17:53:34] ABILIS_CPX:d user:httpuser

Parameter:     | Value:
---------------+---------------------------------------------------------------
USER:               httpuser
ALIAS:              httpuser
ID:                 4    <Read Only>
PWD:                *******
ACT:                YES
GROUP:
CTIP:               #
CLUS:               #
OPC-ROLE:           USER
OPC-VIEW:           *
OPC-MONITOR:        NONE
HTTP:               YES
HTTP-PROT:          PLAIN,SSL
-------------------------------------------------------------------------------

[15:12:54] ABILIS_CPX:d http rights

-------------------------------------------------------------------------------
ID: PATH:
       USER:                            FILE: DIR:  RECUR: PROT:
------------------------------------------------------------------------------
  3 /sys/opc/
       httpuser                         r---  l---  YES    PLAIN,SSL
-------------------------------------------------------------------------------
...


68.16. How to activate the FTP server		68.18. How to activate the TRFA resource