Part VI. HowTo
Part VI. HowTo
Table of Contents
67. HowTo - Management
67.1. How to enter into the Abilis control-program
67.2. How to prepare an Abilis Compact-Flash using a PC
67.3. How to use the Console configurator
67.4. How to remotely upgrade the Abilis firmware
67.5. How to remotely transfer files using a terminal emulator
67.6. How to restart the Abilis
67.7. How to upgrade configuration files to newer firmware versions
67.8. How to copy files using a removable drive
67.9. How to know which kind of hardware is mounted on Abilis
67.10. How to automatically reassign the USBPORTID
67.11. How to upgrade ADSL2+ modem firmware
67.12. How to manage licences
67.13. How to view boot log
67.14. How to change the login passwords
67.15. How to activate the Abilis SSH server
67.16. How to open a TELNET connection from Abilis
67.17. How to open a SSH connection from Abilis
67.18. How to create a list
67.19. How to configure Abilis as a SYSLOG client
67.20. How to trace the internal events for debugging purposes
67.21. How to prevent brute force attacks
68. HowTo - Networking
68.1. How to configure LAN settings
68.2. How to activate a new ethernet port
68.3. How to assign several IP addresses to the same LAN port
68.4. How to configure ADSL connections using USB modems
68.5. How to configure HDSL/SHDSL connections using V.35/G.703 synchronous ports
68.6. How to configure the default IP route
68.7. How to configure the Network Address Translation (NAT)
68.8. How to share a single Internet connection among multiple computers
68.9. How to access IP hosts and services which are behind a NAT manager (port forwarding)
68.10. How to setup DDNS service on Abilis
68.11. How to configure a Remote Access Server (RAS)
68.12. How to configure an ISDN PPP Dial-UP connection
68.13. How to configure a VPN tunnel between two Abilis
68.14. How to configure a voice tunnel between two Abilis
68.15. How to activate the DHCP resource
68.16. How to activate the FTP server
68.17. How to activate the HTTP server
68.18. How to activate the TRFA resource
68.19. How to use state detection of IP interfaces
68.20. How to activate the SNTP resource
68.21. How to activate the SNMP agent
68.22. How to publish the users on the Abilis LDAP server
69. HowTo - CTI system
69.1. How to configure ISDN ports to connect PBX or ISDN lines
69.2. How to configure FXS (POTS) ports for analog telephones or fax machines
69.3. How to program a group of telephone lines
69.4. How to configure fax modem relay parameter
69.5. How to create a VoIP tunnel
69.6. How to register an IAX telephone onto Abilis
69.7. How to register a SIP telephone onto Abilis
69.8. How to register Abilis as a client of Asterisk
69.9. How to register Abilis as a client of a SIP server
69.10. How to configure the speedlimit
69.11. How to configure opc to collect call information from a remote abilis
69.12. How to activate the Accounting service
69.13. How to enable pickup service for a POTS/ISDN port
69.14. How to enable pickup service for a SIP account
69.15. How to configure CTIDISA to implement a responder
69.16. How to configure Last Calling Service
69.17. How to configure DATA CALL BACK using an CELL Key, calling an ISDN number
69.18. How to configure CTISMS to send sms using the web interface
69.19. How to configure CTISMS to send sms via emails
70. HowTo - Abilis VMX
70.1. How to set up an Abilis VMX environment
70.2. How to create a VM in VirtualBox
70.3. How to install a Xen-compatible kernel on the guest
70.4. How to convert and upload the disk image
70.5. How to make a rtXen configuration file
70.6. How to access to the VM's files
70.7. How to start a virtual machine
70.8. Configuration of a bridged network with domU and Abilis
70.9. How to create a sparse file
70.10. Example: Installation of SmeServer 8.1
71. HowTo - OPC panel - Enduser manual
71.1. How to use the OPC panel
72. FAQ - Frequently Asked Questions
72.1. ISDN lines
72.2. POTS ports
72.3. ADSL/HDSL lines
72.4. CTI system
72.5. IP router
72.6. Abilis system
72.7. Tunnelling
72.8. IPSEC
72.9. CTISMS
72.10. UMTS Box
