Part VI. HowTo

Table of Contents

• 70. HowTo - Management
  • 70.1. How to enter into the Abilis control-program
  • 70.2. How to prepare an Abilis Compact-Flash using a PC
  • 70.3. How to use the Console configurator
  • 70.4. How to remotely upgrade the Abilis firmware
  • 70.5. How to remotely transfer files using a terminal emulator
  • 70.6. How to restart the Abilis through the command-line and the WEB interface
  • 70.7. How to upgrade configuration files to newer firmware versions
  • 70.8. How to copy files using a removable drive
  • 70.9. How to know which kind of hardware is mounted on Abilis
  • 70.10. How to automatically reassign the USBPORTID
  • 70.11. How to replace ADSL modem with ADSL2+ modem
  • 70.12. How to upgrade ADSL2+ modem firmware
  • 70.13. How to upgrade UMTSBOX-2 firmware
  • 70.14. How to upgrade POTS card firmware
  • 70.15. How to upgrade POTSBOX firmware
  • 70.16. How to upgrade POTSHUB card firmware
  • 70.17. How to upgrade RJS firmware
  • 70.18. How to manage licences
  • 70.19. How to view boot log
  • 70.20. How to change the login passwords
  • 70.21. How to activate the Abilis SSH server
  • 70.22. How to open a TELNET connection from Abilis
  • 70.23. How to open a SSH connection from Abilis
  • 70.24. How to activate the HTTP server
  • 70.25. How to activate the FTP server
  • 70.26. How to create a list
  • 70.27. How to configure Abilis as a SYSLOG client
  • 70.28. How to trace the internal events for debugging purposes
  • 70.29. How to prevent brute force attacks
  • 70.30. How to trace IP packets flow with IPFLOW Tracer
• 71. HowTo - Networking
  • 71.1. How to configure LAN settings
  • 71.2. How to activate a new Ethernet port
  • 71.3. How to activate a new USB Ethernet port
  • 71.4. How to assign several IP addresses to the same LAN port
  • 71.5. How to assign a VLAN for Ethernet interface
  • 71.6. How to change the MAC address of the Ethernet or EthernetUSB interface
  • 71.7. How to configure ADSL connections using USB modems
  • 71.8. How to configure HDSL/SHDSL connections using V.35/G.703 synchronous ports
  • 71.9. How to configure CELLBOX or CELLKEY as gateway for Internet
  • 71.10. How to configure CELLBOX or CELLKEY as backup for Internet
  • 71.11. How to configure the default IP route
  • 71.12. How to configure the Network Address Translation (NAT)
  • 71.13. How to share a single Internet connection among multiple computers
  • 71.14. How to access IP hosts and services which are behind a NAT manager (port forwarding)
  • 71.15. How to configure the NAT loopback
  • 71.16. How to setup DDNS service on Abilis
  • 71.17. How to configure a Remote Access Server (RAS)
  • 71.18. How to configure an ISDN PPP Dial-UP connection
  • 71.19. How to configure a VPN tunnel between two Abilis
  • 71.20. How to configure more VPN tunnels into IP Load Balancing (IPLB)
  • 71.21. How to configure a voice tunnel between two Abilis
  • 71.22. How to activate the DHCP resource
  • 71.23. How to activate the IP TRFA resource
  • 71.24. How to use state detection of IP interfaces
  • 71.25. How to activate the SNTP resource
  • 71.26. How to activate the SNMP agent
  • 71.27. How to publish the users on the Abilis LDAP server
• 72. HowTo - CTI system
  • 72.1. How to configure ISDN ports to connect PBX or ISDN lines
  • 72.2. How to configure FXS (POTS) ports for analog telephones or FAX machines
  • 72.3. How to configure PCphone
  • 72.4. How to program a group of telephone lines
  • 72.5. How to configure a multicast group of SIP phones
  • 72.6. How to configure FAX modem relay parameter
  • 72.7. How to create a VoIP tunnel
  • 72.8. How to register an IAX telephone onto Abilis
  • 72.9. How to register a SIP telephone onto Abilis
  • 72.10. How to register Abilis as a client of Asterisk
  • 72.11. How to register Abilis as a client of a SIP server
  • 72.12. How to configure the Speed Limit
  • 72.13. How to configure OPC to collect call information from a remote Abilis
  • 72.14. How to activate the Accounting service
  • 72.15. How to enable pickup service for a POTS/ISDN port
  • 72.16. How to enable pickup service for a SIP account
  • 72.17. How to configure CTIDISA to implement a responder
  • 72.18. How to configure Last Calling Service
  • 72.19. How to configure DATA CALL BACK using an CELL Key, calling an ISDN number
  • 72.20. How to configure CTISMS to send SMS using the Web interface
  • 72.21. How to configure CTISMS to send SMS via emails
  • 72.22. How to configure a Conference
  • 72.23. How to activate On-Demand recording
  • 72.24. Sending Alarm through a call
  • 72.25. Sending Alarm through SMS
• 73. HowTo - Abilis VMX
  • 73.1. How to set up an Abilis VMX environment
  • 73.2. How to create a VM in VirtualBox
  • 73.3. How to install a Xen-compatible kernel on the guest
  • 73.4. How to convert and upload the disk image
  • 73.5. How to make a rtXen configuration file
  • 73.6. How to access to the VM's files
  • 73.7. How to start a virtual machine
  • 73.8. Configuration of a bridged network with domU and Abilis
  • 73.9. How to create a sparse file
  • 73.10. Example: Installation of SmeServer 8.1
• 74. HowTo - OPC panel - Enduser manual
  • 74.1. How to use the OPC panel
• 75. FAQ - Frequently Asked Questions
  • 75.1. ISDN lines
  • 75.2. POTS ports
  • 75.3. ADSL/HDSL lines
  • 75.4. CTI system
  • 75.5. IP router
  • 75.6. Abilis system
  • 75.7. Tunnelling
  • 75.8. IPSEC
  • 75.9. CTISMS
  • 75.10. UMTS Box